с. Fiber art wall installation.
A completely original wall decoration for the central entrance to the house, living room or bedroom.
Planks can be placed vertically or horizontally.

The basis of each plank is a wooden plank.
Trimmed with colored jute twine.
The thickness of the slats is from 0.4’ to 0.6’ (1-1.5 cm).
The photo shows the difference in the thickness of the slats.

The product consists of 5 strips, the dimensions of which are:
31.4x2.4' = 80x6cm. Thickness 0.6’ = 1.5cm
27.6x1.6' = 70x4cm. Thickness 0.4’ = 1cm
26.3'x1.2' = 67x3cm. Thickness 0.6’ = 1.5cm
2 strips of 13x0.6 ' = 33x1.5 cm. Thickness 0.6' = 1.5cm.


Planks are attached in 2 ways:
1. On the loop that is on each plank. The wall needs a nail for each plank.
2. On adhesive tape (construction or stationery) or on acrylic glue.
To glue the planks to the wall with glue or tape, you need to draw a line at an angle of 90 degrees relative to the floor. And from this line, place the slats.

Delivery up to 3 weeks.