Start-up:

Open the battery compartment located on the lower part, Insert 4 AAA batteries, respecting the polarity instructions written in the battery compartment. Note: Remove the batteries when the device is not in use. Do not mix new batteries with old batteries

Filling the tank:

Make sure the ignition button is off Lift the lid of the reservoir and fill it with liquid soap.Replace the cover and press to secure. Put the power button back on Before filling the tank, it is recommended to clean the internal distribution area, especially when changing the type of fluid. After the water is drained, fill the device with the new liquid.

Note: this dispenser is designed to be used with hand soap, dishwashing liquid and disinfectant. It is not designed to use foaming liquids.

Instructions for use:

After installing the cables and filling the tank, turn the ignition button to on.Place your hand under the spout within range of the sensor.

The dispenser will automatically detect the hand and dispense the soap. Remove your hand after the liquid has spilled

Cleaning and maintenance:

Use only a soft cloth to clean the device. Never use harsh chemicals or abrasives. Place the dispenser in a dry, sheltered place at room temperature when not in use.

Safety instructions:

use the product only as indicated in the instructions,Do not damage the product. Do not place the bottom of the appliance under water to avoid malfunctions of the appliance's electrical components. Or place the appliance on a flat and stable surface. It is not suitable for use in the shower.Supervise children to ensure they do not play with the appliance.

Note: this dispenser is designed to be used with hand soap, dishwashing liquid and disinfectant. It is not designed to use foaming liquids

Product details

Material: stainless steel(silver color) ,plastic(black color)
powered by 4 AAA batteries (NOT Included)

Operation

1. To switch on, press the (ON/+) button on the top for 3 seconds.If you wish to turn it off, press the (OFF/-) button for 3 seconds.
2 To adjust the volume of the soap dispensed, press the (ON/+) or the(OFF/-) button until the desired volume is obtained.