Deliver to 
0 review
1 of 3
kraska-dlya-supportov_ecrater_caliper.png
2 of 3
novinka-kraska-supportov_CHT450_ecrater.png
3 of 3
ecrater_cht450.jpg
kraska-dlya-supportov_ecrater_caliper.png
novinka-kraska-supportov_CHT450_ecrater.png
ecrater_cht450.jpg

Caliper Spray Paint HI-Temp Reds AIM-ONE 450ml 15.21oz

byECRATER
108 sales
$36.00 
 & FREE Shipping

Quantity

plus icon1plus icon
Item description from the seller
down arrow

Caliper Spray Paint HI-Temp Reds 450ml 15.21oz

novinka-kraska-supportov_CHT450_ecrater.png

Caliper Spray Paint HI-Temp (Red) - paint for brake calipers (red), designed to paint brake calipers and drums of cars and motorcycles. The product creates a strong durable coating that can withstand extreme loads and high temperatures during braking. Paint can withstand temperatures up to 360. The spray is offered in a convenient 450 ml bottle with a quality sprayer.

ADVANTAGES OF AIM-ONE PAINT:
universal application (for all types of supports);
high quality spraying;
heat resistant;
dries quickly;
long term coverage.

CONVENIENT AND DURABLE PAINT
Caliper Spray Paint HI-Temp aerosol is easily applied by pressing the cylinder button. The paint quickly and firmly rests on the treated surface. Painted metal parts of the brake system have not only a beautiful appearance, but also anti-corrosion protection. The layer obtained after application is strong and durable: it is resistant to aggressive environmental influences (road chemicals, sand and stones). Caliper Spray Paint HI-Temp forms an even red layer on the surface. The material is not subject to fading and corrosion.

Clean and degrease the calipers from dust, oily stains, rust.
Dry the calipers before applying.
If you have not removed the calipers from the car, seal the adjacent areas with masking tape or film to avoid paint.
Shake the can gently before use.
Spray the paint at a distance of 15-25 cm in a thin even layer so as not to form stains. It is recommended to put 8-10 layers.
Depending on weather conditions, layers are applied with a time interval of 2-3 minutes. At low temperatures, the time between applications increases.
Paint each caliper alternately.
After 15 minutes after drying the surface, you can proceed to the installation of the part.

Similar Products