Raskoksoil Valera CLEANING THE ENGINE OIL SYSTEM VMPAUTO 100ml

Raskoksoil Valera CLEANING THE ENGINE OIL SYSTEM VMPAUTO 100ml

Removal of carbon deposits on the piston

CLEANING THE ENGINE OIL SYSTEM

Raskoksoil is not just a flush, it is an oil system cleaner. Releases oil scraper rings, reducing oil waste. The composition dissolves sparingly soluble substances in the oil, eliminating the possibility of blockage of the oil outlet channels and scuffing with abrasive particles.

Instruction

Apply when the product temperature is above +10°.

Check the oil level and select the dosage of the composition. The bottle is designed for 4-5 liters of oil or 25 ml per 1 liter of oil.
Warm up the engine to operating temperature, turn off, pour the composition into the old or flushing oil. Start the engine.
For effective cleaning, it is necessary to keep the engine speed in the range of 1700-2300 rpm for 20-25 minutes. Stop the engine.
Be sure to change the oil with decoke oil and the filter before the engine cools down completely (due to the high efficiency of dissolving varnishes and deposits and possible re-deposition upon cooling). After changing the filter and oil, immediately start the engine and let it run for 10-15 minutes.
After application in internal combustion engines with a painted crankcase, it is necessary to check the integrity of the paintwork, if necessary, remove the paint. In the case of an inspection of the oil pan for the integrity of the paintwork, it is necessary to flush the oil system with flushing oil before dismantling the oil pan.