2 PIECES Metal cladding additive for engine 3ton PlaMet 100 ml

2 PIECES Metal cladding additive for engine 3ton PlaMet 100 ml

Forms a high-strength and mechanically resistant coating on the surfaces of friction pairs. Prevents premature wear of engine parts, fills microcracks and scratches, restoring worn parts to the nominal size. As a result of the use of the additive, the engine resource is significantly increased, power is increased, oil consumption is reduced, compression is restored and leveled across the cylinders. The additive is compatible with all types of motor oils and does not change their properties, as it uses motor oil as a transport agent.

INSTRUCTIONS FOR USE:

1. After changing the oil and oil filter, warm up the engine to operating temperature.

2. Shake the contents of the bottle thoroughly and pour into the engine oil filler neck in the amount of: 1 bottle per 5 liters of oil. With a run of more than 100,000 km - 2 bottles.

3. Start the engine and leave it at idle for 10-15 minutes.