Flushing the cooling system Synthetic LAVR, 430 ml

Flushing the cooling system Synthetic LAVR, 430 ml

Flushing of the cooling system Synthetic is used for cooling systems of all types of gasoline and diesel engines of passenger cars.

Dissolves and removes combined contaminants from the channels of the cooling system, radiators
Reduces thermal load on the internal combustion engine
Extends the life of new antifreeze by 30-40%
Increases the resource of the radiator, pump and thermostat
Two-phase composition based on an acid salt cleaner and a neutral remover of organic contaminants
Compatible with all types of coolant
Recommended for systematic use with each replacement of antifreeze

Flushing the cooling system Synthetic - an additive to eliminate all types of initial contamination from the cooling system, which is added to the antifreeze before replacing it. The active components of the composition in 30 minutes of exposure dissolve and remove scale and rust, decomposition products of the coolant and traces of oil formed during operation. The procedure extends the life of the radiator, pump and thermostat, increases the life of the new antifreeze by 30 - 40% and eliminates overheating of the motor, resulting in a reduced risk of engine breakdown. It is recommended to flush with each replacement of antifreeze. The product is suitable for both liquid and combined cooling systems in vehicles with gasoline and diesel engines.

Suitable for both independent use and as a service tool. Before use, warm the composition to room temperature and shake.

Cool the engine, open the cover of the expansion tank or radiator and pour the drug
Warm up the engine and let it idle for 30 minutes
Drain the wash solution
Flush the cooling system: fill in distilled or clean warm water, warm up the engine and let it idle for 10-15 minutes, drain the water. Repeat procedure if necessary
Fill in new antifreeze.