Chimney Brush Accessories, 100/150/200mm Brush Head, 400/570mm Pole, Hexagonal RodCleaning Tools 

Note:

*If you receive the pole is white and hard. Don't worry, if you leave it exposed in the air for a period of time, it will absorb moisture in the air and become soft (it needs to last about a month). Because the white pole is just produced. The newly produced PA material is hard.

*All threads in this store are the same as the threads in this link (unless otherwise specified in the link). The thread is M8, specifically 5/16 (18).

How to use

1. Connect a sufficient number of poles as needed;

2. Install the brush head on the pole, (if you use a power drill, go ahead and install the hex pole);

3. When you start off go slow and clean out 2-3 feet at a time and pull the brush back towards you to bring all the dust junk back to or down to you. Going vertical to push the junk out won't work. However horizontal may work for you.

4. Get someone to do the drill work for you as you guide the rod and brush in and out of the pipe. As you go in pull it back and forth and then go in further. Once you have done about 3 feet pull it all back out to bring the junk back to you.

5. WEAR A MASK !! There will be dust everywhere. It will smell like fabric softener everywhere.

6.Caution:Rotate brush/rod(s) assembly only in a clockwise direction.Reversing the direction could cause the brush head or rod(s) to detach inside the duct.

WARNING: Never force the brush/rod assembly through the duct! If it should become jammed, pull assembly away from constricted area a few inches (still rotating in a clockwise direction) then slowly push forward.

WARNING:Please do not bend the rod connecting the electric drill. If you have to bend, the bending angle should not exceed 30 °, and please turn it at a very, very slow speed. Otherwise, the product will be damaged by you!

WARNING: When the length of the pole is greater than the length you need to use. Please remove the extra poles. Otherwise, the redundant rods will be twisted together due to the rotation of the electric drill, and the rods will be damaged!

Note

* This link is for these friends who need to buy additional accessories. There are other links in the store where there are cheaper and more comprehensive packages to choose from. Of course, if you choose to place an order directly from here, I will also send it normally.

*All products are inch threads5/16 and are used with the products of this store. If purchased separately, please confirm whether the threads match!!!!!!!!!!!

*This link is set up to meet the different requirements of different friends for the quantity of various accessories;

*100/150mm brush head, Hexagonal Rod can be purchased separately;

How to buy in combination

*Please add the products of this link to shopping;

*Then, add other chimney brushes from my shop (the products you need) to the cart;