FORUM additive for processing CV joints (drives) 200 ml FR601

FORUM additive for processing CV joints (drives) 200 ml FR601

FORUM for actuators is used for processing constant velocity joints (actuators). The additive is compatible with any type of lubricant.

Effects of using the FORUM additive for drives:

increases the operational life of the CV joint by 2–3 times;
reduces starting resistance at low temperatures;
has high anti-seize properties;
reduces the coefficient of friction in case of emergency loss of lubrication by 100 times;
protects the CV joint in case of overheating up to 500 °C.
Composition: UPTFE-Forum®, lithol-24, base oil.

FORUM for drives is used according to the following scheme:

Remove old grease.
Mix the FORUM additive with an equal amount of any gear lubricant in a ratio of 1:1
Add the resulting composition to the drive.
For worn drives, it is recommended to use the additive without dilution.