Most Reviewed
Most Reviewed
Layout for laser cutting Mini - bar Drakar under 4 mm CDR DXF CNC models laser drawing sketch
FazerLazer
6 sales
NaN
NaN
$8.008.00Â
 & Instant Download
Layout for laser cutting Mini - bar Drakar under 4 mm CDR DXF CNC models laser drawing sketch
0review
NaN
people viewing this product right now.people are viewing this. Don’t miss out!
Payment Methods:
Payment Methods:
Payment Methods:
About this item
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
About this item
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
$8.00
people viewing this product right now.people are viewing this. Don’t miss out!
Payment Methods:
Delivery & Return Policy
Shipping and Return Policy
Returns:Not Accepted
But please contact me if you have problems with your order.
Payment Methods
FazerLazer
Message
Payment Methods
About Seller
FazerLazer
Message Seller
Most Reviewed
Layout for laser cutting Mini - bar Drakar under 4 mm CDR DXF CNC models laser drawing sketch
FazerLazer
6 sales
NaN
NaN
$8.008.00Â
 & Instant Download
Layout for laser cutting Mini - bar Drakar under 4 mm CDR DXF CNC models laser drawing sketch
0review
NaN
people viewing this product right now.people are viewing this. Don’t miss out!
Payment Methods:
Payment Methods:
Payment Methods:
Payment Methods:
About this item
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
About this item
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
🔶Mini - bar "Drakar" under 4 mm🔶
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
The layout is prepared for a material thickness of 4 mm + with a cut compensation of 0.1 mm
Flexible cuts are prepared in two versions with a 0.1 mm contour and without a contour
The length of the cut with a contour of 0.1 mm is 38 m
The length of the cut without a contour for a flexible cut is 34.5 m
The required area of the material is 0.525 m2
Overall dimensions 461 x 200 x 134 mm
Attention!!! This is a digital product, not a physical one!
Free Shipping
24/7 Live Chat
Secure Payments