Mini coffee cup embroidery design Mini cup embroidery steamy cup embroidery design tea cup
embroidery Tiny cup small coffee cup mini tea cup #359 

This design comes with 16 sizes :
0.92" x 0.53" 24mm x 14mm 904 st
1.09" x 0.63" 28mm x 16mm 1117st
1.28" x 0.73" 33mm x 19mm 1338 st
1.45" x 0.83" 37mm x 21mm 1583st
1.63" x 0.93" 42mm x 24mm 1852 st
1.81" x 1.03" 46mm x 27mm 2134 st
1.98" x 1.13" 51mm x 29mm 2399 st
2.17" x 1.23" 55mm x 32mm 2721st
2.35" x 1.33" 60mm x 34mm 3023 st
2.53" x 1.43" 65mm x 37mm 3344 st
2.70" x 1.53" 69mm x 39mm 3692 st
2.88" x 1.63" 74mm x 42mm 40641 st
3,06" x 1.72" 78mm x 44mm 4407st
3,24" x 1.83" 83mm x 47mm 4843st
3,42" x 1.93" 87mm x 49mm 5231st
3.56" x 2.01" 91mm x 51mm 5557 st

The following 8 formats are included in the file you will receive:

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

*VP3 - (Husqvarna,Viking)

*VIP

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need
an embroidery machine to stitch these designs out.
**************************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your
computer to the machine to use this file. This listing is for the machine file only - not a finished
item.
******************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the
project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and
tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the
fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent
needle holes as well.