Rose Embroidery Design

 

Rose Embroidery Design Flower machine Embroidery Design Floral embroidery Rosebud embroidery Rose bud Flower Floral design #732

 

This design comes with 25 sizes :

 

2.99” X 3.99”  (76.0 X 101.4)  9177 st

3.19” X 4.25”  (81.0X 108.0)  9738 st

3.38”  X 4.50”  (85.8 X 114.4) 10267 st

3.57” X 4.75”  (90.6 X 120.6) 10812 st

3.75” X 4.99”  (95.2X 126.8) 11299 st

3.94” X 5.25” (100.0 X 133.4) 11873 st

4.13” X 5.50” (104.8 X 139.8) 12406 st

4.31” X 5.75” (109.6 X 146.1) 12929 st

4.50” X 5.99” (114.2 X 152.2) 13442 st

4.69” X 6.29” (119.2 X 158.8) 13997 st

4.88” X 6.50” (124.0 X 165.2) 14540 st

5.07” X 6.76” (128.8 X 171.6) 15074 st

5.25” X 6.99 “ (133.4 X 177.6) 15618 st

5.44” X 7.25” (138.2 X 184.2) 16138 st

5.63” X 7.50”  (143.0 X 190.6) 16654 st

5.82” X 7.75” (147.8 X 196.8) 17178 st

6.00” X 7.99” (152.4 X 203.0) 17693 st

6.19” X 8.25” (157.2 X 209.6) 18245 st

6.38” X 8.50” (162.0 X 216.0) 18788 st

6.57” X 8.76” (166.8 X 222.4) 19307 st

6.75” X 8.99” (171.4 x 228.4) 19902 st

6.94” X 9.25” (176.4 x 265.0) 20460 st

7.13” X 9.50” (181.2 X 241.4) 20979 st

7.31” X 9.76” (185.8 X 247.8) 21514 st

7.49” X 9.98” (190.2 X 253.6) 21994 st

 

 

 

   

The following 9 formats are included in the file you will receive:

 

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

*VP3 - (Husqvarna,Viking)

*VIP

 

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

 

**************************************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.

******************************************************************************************

 

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.