Heron Mark Sword
Blade made of 1065 High Carbon Steel
Sword with a single-edged, slightly curved blade
Total length approx. 1071mm
Blade length approx. 810mm
The approximately 192mm long handle is wrapped in blue suede leather and tied with brass wire
The pommel is about 47.3mm long and has a diameter of about 39.7mm
The cross-guard is about 135mm long
The ring-guard resembles a tsuba, it is approx. 5.5mm thick and has a diameter of approx. 70.8mm
Cross section of the blade at the cross-guard is 30.93 x 4.6mm
Cross-section of the blade 10cm off the blade point about 26.8 x 4.25mm
The etched Heron Emblem (Heron Mark) on the blade is about 10cm long
Thickness of the cutting edge approx. 1mm
The POB is about 95mm off the guard.