Bass Trap "Line" is a high-performance low-frequency absorber specifically designed to be mounted in the corners where two walls meet vertically, or horizontally at the intersection of walls and ceiling, in order to achieve optimal sound quality in any room.

These bass traps effectively capture the random 'omni-directional' bass energy that tends to accumulate in corners, preventing it from dominating the room. By doing so, they reduce smear and enhance bass definition and punch, allowing for better control over low-frequency energy and helping studios achieve a tighter, more controlled bass output.

Acoustic engineers place significant importance on addressing the angles of intersection in rooms, as these areas play a crucial role in how sound is distributed. Walls and ceilings act as sound guides, directing sound towards corners where it can accumulate and cause undesirable low-frequency resonances. By placing traps in these corners, the time of natural reverberation is significantly reduced, resulting in cleaner, more defined sound characteristics, particularly in the lower part of the frequency spectrum.

Specifications:
- Dimensions: 250x250 mm / 9.85x9.85 inches;
- Length: 500, 1000 mm / 19.7, 39.4 inches
- Material: Open cell polyurethane foam;
- Density: 1.8 lb/ft3 (30 kg/m3);
- NRC range: approximately 0.8 — 0.94;
- Permanent deformation: up to 3.6% (after 22 hours, 50% compression at 158 °F);
- Tensile strength: from 90 kPa;
- Elongation at break: minimum 120%;
- Withstands temperature: approximately 122 °F;
- CIELAB chromatic error range: Delta E ≤ 5.

Installation:
The installation process involves using continuous sheets of "Double Sided Adhesive Tape" or glue applied onto an acrylic base.