Sea Turtle machine embroidery Design Preppy Turtle embroidery Beach embroidery Sea Turtle Summer embroidery baby embroidery sea #66

This design comes with 25 sizes  (width):

1.99” x 1.91” (50.6mm x 48.4mm)                           3197st

2.24” x 2.14” (57.0mm x 54.4mm)                          3511st

2.50” x 2.38” (63.4mm x 60.4mm)                          3812st

2.75” x 2.61” (69.8mm x 66.4mm)                           4052st

3.00” x 2.86” (76.2mm x 72.6mm)                           4341st

3.24” x 3.09” (82.4mm x 78.6mm)                           4575st

3.50” x 3.33” (88.8mm x 84.6mm)                           4832st

3.75” x 3.57” (95.2mm x 90.6mm)                           5066st

4.00” x 3.81” (101.6mm x 96.8mm)                         5283st

4.24” x 4.05” (107.8mm x 102.8mm)                      5534st

4.50” x 4.28” (114.2mm x 108.8mm)                      5738st

4.75” x 4.52” (120.6mm x 114.8mm)                      5967st

5.00” x 4.76” (127.0mm x 121.0mm)                      6154st

5.24” x 5.00” (133.2mm x 127.0mm)                      6363st

5.50” x 5.24” (139.6mm x 133.0mm)                      6565st

5.75” x 5.47” (146.0mm x 139.0mm)                      6779st

6.00” x 5.71” (152.4mm x 145.0mm)                      6965st

6.25” x 5.95” (158.8mm x 151.2mm)                      7185st

6.50” x 6.19” (165.0mm x 157.2mm)                      7378st

6.75” x 6.43” (171.4mm x 163.2mm)                      7563st

7.00” x 6.66” (177.8mm x 169.2mm)                      7732st

7.24” x 6.91” (184.0mm x 175.4mm)                      7923st

7.50” x 7.14” (190.4mm x 181.4mm)                      8110st

7.75” x 7.38” (196.8mm x 187.4mm0                      8296st

8.00” x 7.61” (203.2mm x 193.4mm)                      8450st

 

The following 8 formats are included in the file you will receive:

 

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

*VP3 - (Husqvarna,Viking)

*VIP

************************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.