About this item

Flower Frame Floral Wreath

For a quality stitched design, it is recommended to use proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine-gauge and knit fabric such as T-shirts and baby onesies, it is best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric and a wash-away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.

This machine embroidery design comes with multiple embroidery file formats and can be used with multiple embroidery machines.

Item description from the seller

Flower Frame Floral Wreath

This design comes with 29 sizes :
1. 3.00” X 3.00” (76.2mmn X 76.2mm) 5883 st
2. 3.22” X 3.23” (81.9mm X 82.0mm) 6510 st
3. 3.48” X 3.48” (88.4mm X 88.4mm) 7126 st
4. 3.73” X 3.73” (94.8mm X 94.8mm) 7817 st
5. 3.97” X 3.97” (100.8mm X 100.8mm) 8381 st
6. 4.23” X 4.22” (107.4mm X 107.3mm) 9139 st
7. 4.48” X 4.48” (113.8mm X 113.8mm) 9825 st
8. 4.73” X 4.72” (120.1mm X 120.0mm) 10611 st
9. 4.98” X 4.96” (126.4mm X 126.1mm) 11310 st
10. 5.23” X 5.23” (132.8mm X 132.8mm) 12238 st
11. 5.48” X 5.48” (139.1 mm X 139.1mm) 12968 st
12. 5.73” X 5.72” (145.6mm X 145.4mm) 13825 st
13. 5.97” X 5.97” (151.6mm X 151.6mm) 14707 st
14. 6.23” X 6.23” (158.3mm X 158.2mm) 15572 st
15. 6.48” X 6.47” (164.6mm X 164.4mm) 16431 st
16. 6.73” X 6.73” (1714.0mm X 171.0mm) 17443 st
17. 6.98” X 6.97” (177.2mm X177.0mm) 18395 st
18. 7.25” X 7.24” (184.2mm X 184.0mm) 19445 st
19. 7.48” X 7.47” (190.0mm X 189.8mm) 20392 st
20. 7.73” X 7.72” (196.4mm X 196.2mm) 21383 st
21. 7.97” X 7.97” (202.4mm X 202.4mm) 22354 st
22. 8.23” X 8.22” (209.0mm X 208.8mm) 26525 st
23. 8.48” X 8.48” (215.4mm X 215.4mm) 24693 st
24. 8.73” X 8.72” (221.8mm X 221.6mm) 25669 st
25. 8.98” X 8.96” (228.0mm X 227.6mm) 26788 st
26. 9.24” X 9.23” (234.6mm X 234.4mm) 28103 st
27. 9.48” X 9.48” (240.8mm X 240.7mm) 29209 st
28. 9.73” X 9.72” (247.2mm X 247.0mm) 30442 st
29. 9.97” X 9.97” (253.2mm X 253.2mm) 31521 st

The following 9 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
*VP3 - (Husqvarna,Viking)
*VIP

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an
embroidery machine to stitch these designs out.
*********************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to
the machine to use this file. This listing is for the machine file only - not a finished item.
*********************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric
along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies,
I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside
the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin
lines. A thinner gauge knit needle can prevent needle holes as well.

Item description from the seller

Flower Frame Floral Wreath

This design comes with 29 sizes :
1. 3.00” X 3.00” (76.2mmn X 76.2mm) 5883 st
2. 3.22” X 3.23” (81.9mm X 82.0mm) 6510 st
3. 3.48” X 3.48” (88.4mm X 88.4mm) 7126 st
4. 3.73” X 3.73” (94.8mm X 94.8mm) 7817 st
5. 3.97” X 3.97” (100.8mm X 100.8mm) 8381 st
6. 4.23” X 4.22” (107.4mm X 107.3mm) 9139 st
7. 4.48” X 4.48” (113.8mm X 113.8mm) 9825 st
8. 4.73” X 4.72” (120.1mm X 120.0mm) 10611 st
9. 4.98” X 4.96” (126.4mm X 126.1mm) 11310 st
10. 5.23” X 5.23” (132.8mm X 132.8mm) 12238 st
11. 5.48” X 5.48” (139.1 mm X 139.1mm) 12968 st
12. 5.73” X 5.72” (145.6mm X 145.4mm) 13825 st
13. 5.97” X 5.97” (151.6mm X 151.6mm) 14707 st
14. 6.23” X 6.23” (158.3mm X 158.2mm) 15572 st
15. 6.48” X 6.47” (164.6mm X 164.4mm) 16431 st
16. 6.73” X 6.73” (1714.0mm X 171.0mm) 17443 st
17. 6.98” X 6.97” (177.2mm X177.0mm) 18395 st
18. 7.25” X 7.24” (184.2mm X 184.0mm) 19445 st
19. 7.48” X 7.47” (190.0mm X 189.8mm) 20392 st
20. 7.73” X 7.72” (196.4mm X 196.2mm) 21383 st
21. 7.97” X 7.97” (202.4mm X 202.4mm) 22354 st
22. 8.23” X 8.22” (209.0mm X 208.8mm) 26525 st
23. 8.48” X 8.48” (215.4mm X 215.4mm) 24693 st
24. 8.73” X 8.72” (221.8mm X 221.6mm) 25669 st
25. 8.98” X 8.96” (228.0mm X 227.6mm) 26788 st
26. 9.24” X 9.23” (234.6mm X 234.4mm) 28103 st
27. 9.48” X 9.48” (240.8mm X 240.7mm) 29209 st
28. 9.73” X 9.72” (247.2mm X 247.0mm) 30442 st
29. 9.97” X 9.97” (253.2mm X 253.2mm) 31521 st

The following 9 formats are included in the file you will receive:
* DST - (Tajima)
* EXP - (Melco)
* HUS - (Husqvarna,Viking)
* JEF - (Janome,Elna,Kenmore)
* PES - (Brother,Deco,Babylock)
* SEW - (Janome,Elna,Kenmore)
*VP3 - (Husqvarna,Viking)
*VIP

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an
embroidery machine to stitch these designs out.
*********************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to
the machine to use this file. This listing is for the machine file only - not a finished item.
*********************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric
along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies,
I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside
the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin
lines. A thinner gauge knit needle can prevent needle holes as well.