XADO Anticarbon Cleaning the engine from carbon 320ml 10.82oz XB40011

XADO Anticarbon Cleaning the engine from carbon 320ml 10.82oz

Anticarbon
Cleaning the engine from soot.
A fast-acting product designed to remove carbon deposits and repair stuck piston rings in gasoline and diesel engines.

Removes all scale and dirt from the surfaces of parts of the cylinder-piston system.

Does not require an oil change after application.

Applications
1. Warm up the engine. The engine should be warm, but not hot.
2. Unscrew plugs (burner). Disconnect the ignition timing sensor, hall sensor or switch wire.
3. Insert the contents of 1 tube into each cylinder through the stopper hole. Screw the plugs back. Wait 10-20 minutes. Turn off the plugs. Cover the holes with an absorbent cloth to avoid staining the paint. Turn the engine over with the starter for a few seconds.
4. Replace the plugs (burners).
5. Start the engine and let it run at high engine speed for 15-20 minutes. During this time, the remaining softened coal will be removed through the exhaust system.
dosage
1 tube - 1 cylinder.

Notes
Avoid contact with paintwork.
Safe on catalytic converters, oxygen sensors, rubber products and seals.

VERYLUBE Anticarbon in tubes can be used to flush the engine oil system:

1. Introduce anti-deposit into a warm engine through the oil filler neck at the rate of 40 ml of anti-deposit per 3-5 liters of oil.
2. Let the engine idle for 10-15 minutes.
3. Change oil and oil filter.