433MHz Wireless Remote Relay Switch – AC DC Relay with Momentary, Toggle, Latch & Timer Modes for Pump and LED Control

Make compatible equipment easier to operate with wireless control that suits your routine. This 433MHz remote relay switch supports momentary, toggle, latched, and timed operation. Its receiver accepts a broad AC or DC supply range for different installations. Learning-code pairing lets you configure compatible transmitters for your preferred mode. With an open-field range of 328.08 ft, this wireless control receiver offers convenient switching for suitable lighting and equipment.

Key Features
• Operate compatible loads remotely through a 433 MHz transmitter.
• Choose momentary, toggle, or latched switching to match your application.
• Select a timed mode with a 5-, 10-, or 15-second delay.
• Accommodate AC or DC installations within the receiver’s specified voltage range.

Why Choose Our 433MHz Wireless Remote Relay Switch?
Compared with a fixed-function remote switch, its selectable modes provide more flexibility for different control tasks. Learning-code pairing simplifies configuration with compatible transmitters. Its compact receiver housing fits a variety of suitable equipment setups.

Perfect For
Ideal for compatible LED lighting, door-access circuits, and properly rated pump or motor control systems. It suits projects requiring wireless on/off control, momentary activation, or a short timed switching interval.

Product Specifications
• Operating frequency: 433 MHz
• Transmitter power: 1 × 23A 12 V battery
• Transmitter encoding: Fixed code
• Transmitter dimensions: 2.17 × 1.10 × 0.39 in
• Open-field transmission range: 328.08 ft
• Receiver supply: AC 75–240 V or DC 9–72 V
• Receiver output voltage: Same as supply voltage
• Receiver pairing: Learning code
• Relay contact rating: 15 A at AC 110 V or 240 V
• Continuous load requirement: Below 15 A
• Relay peak marking: 30 A; not a continuous-load rating
• Receiver dimensions: 2.56 × 1.77 × 1.10 in
• Modes: Momentary, toggle, latched, or timed
• Timer options: 5, 10, or 15 sec

Compatibility Notes
• Additional transmitters must match the receiver’s 433 MHz frequency and coding requirements.
• Motor and pump suitability depends on startup current and the applicable load rating.
• The output is supply-voltage switching, not a voltage converter.

Bring flexible wireless operation to your setup with the 433MHz Wireless Remote Relay Switch. Confirm voltage, load, and transmitter compatibility before ordering.