Coffee cup embroidery design Mini cup embroidery steamy cup embroidery design tea cup embroidery Tiny cup small coffee cup mini tea cup #360

This design comes with 11 sizes :

2,67" x 1,51" 68mm x 39mm 3629 st

3,12" x 1,76" 80mm x 45mm 4543st

3,56" x 2,01" 91mm x 51mm 5561st

3,76" x 2,13" 96mm x 54mm 6060st

4,01" x 2,26" 102mm x 58mm 6668st

4,26" x 2,40" 109mm x 61mm 7398st

4,46" x 2,51" 113mm x 64mm 7890st

4,76" x 2,69" 121mm x 69mm 8778st

4,90" x 2,76" 125mm x 71mm 9298 st

5,01" x 2,83" 128mm x 73mm 9550 st

5,34" x 3,01" 136mm x 77mm 10594 st

The following 9 formats are included in the file you will receive:

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

*VP3 - (Husqvarna,Viking)

*VIP

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

*************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.

************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.