Grease SINTEC lithium-potassium No. 158 400g 81824

Grease SINTEC lithium-potassium No. 158 400g 81824

Sintec No. 158 grease is made by thickening a mixture of high-quality petroleum oils with a lithium soap of 12-hydroxystearic acid with the addition of an additive package that provides high anti-wear, anti-corrosion and anti-oxidation properties.

excellent mechanical stability
high resistance to oxidation
excellent corrosion protection of the assembly
high adhesion on the friction surface
good anti-wear properties

The grease is intended for lubrication of needle bearings of cardan joints of non-constant angular velocity, as well as for use in automotive electrical equipment (generators, starters, magnetos). Temperature range of application from minus 30 to 110 °C.

Appearance Homogeneous ointment from blue to blue
Dropping point ° not lower than 150
Penetration at 25°, mm, 0.1 mm 260-350
Corrosion test on plates of steel grade St 45 according to GOST 1050-88 withstands
Mass fraction of water, % traces
Colloidal stability, % no more than 15
Tensile strength, Pa (gf/cm2) at t
at 20 °, within 300-700
at 80 °, within 150
Effective viscosity, Pa*s at -30°C with an average strain rate gradient of 10 s-1, Pa*s (P) no more than 1800
Evaporation at 120°C, wt %, no more than 4.5