Square Applique embroidery design

Square Applique embroidery Design Square Applique Machine Embroidery design Applique Design Square applique Shape applique #114

This design comes with 14 sizes:

0.99”   x 0.99” 897 st

 1.49”  X 1.50” 1325 st

1.99”  X 1.99” 1752 st

2.49”  x 2.50” 2174 st

2.98”  x 3.00” 2626 st

3.49”  x 3.50” 3055 st

3.98”  x 3.99” 3479 st

4.49”  x 4.50” 3925 st

4.98”  x 4.99” 4422 st

5.48” x 5.50” 4959 st

 5.98”  x 5.99” 5543 st

6.48”  x 6.50” 9853 st

6.98”  x 6.99” 10591 st

7.48”  x 7.50” 11359 st

The following 8 formats are included in the file you will receive:

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

* VP3

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

*************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.

************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.