Cooling system flush Classic for commercial vehicles LAVR, 980 ml

Cooling system flush Classic for commercial vehicles LAVR, 980 ml

Dissolves and removes inorganic contaminants from the channels of the cooling system, radiators
Reduces thermal load on the internal combustion engine
Extends the life of new antifreeze by 30-40%
Increases the resource of the radiator, pump and thermostat
Contains a complex of organic and inorganic acids
Recommended for systematic use with each replacement of antifreeze

Flushing the cooling system Classic - a concentrated composition that removes inorganic contaminants accumulated in the cooling system during operation in 30 minutes. The acids in the flush dissolve scale and rust, and then remove them from the system. The procedure extends the life of the new antifreeze by 30-40%, increases the life of the radiator, pump and thermostat, eliminates engine overheating, which reduces the thermal load on the engine and the risk of breakdowns. Recommended for both liquid and combined cooling systems.

Flushing the cooling system Classic is suitable for both independent use and as a service tool. Before use, warm the composition to room temperature and shake.

Cool down the engine
Drain antifreeze from cooling system
Pour the drug and top up with distilled water up to the MIN mark
Warm up the engine and let it idle for 30 minutes
Drain the wash solution
Flush the cooling system: fill in distilled or clean warm water, warm up the engine and let it idle for 10-15 minutes, drain the water. Repeat procedure if necessary
Fill in new antifreeze.