About this item

Creates a tough, durable coating that withstands extreme braking loads.
Withstands temperatures up to 260˚.
Unique formula with the addition of ceramic polymers.
The paint has successfully passed multiple tests on heavy vehicles.
Specially formulated for painting calipers, brake drums, discs and springs.

Spray paint for brake calipers ABRO 312g

Mode of application:

1. Clean the surface of dirt, dust, peeling paint, wax with Brake Cleaner.
2. Protect surrounding surfaces from paint ingress. Lightly sand the surface with 320 grit sandpaper or equivalent.
3. Apply the paint at a temperature of 20 to 30˚, with a humidity of no more than 50%.
4. Thoroughly shake the balloon for at least one minute after the ball rattles inside. Shake again for 10 seconds once a minute.
5. Hold the can parallel to the surface to be painted at a distance of 20-25 cm and apply the paint in smooth overlapping motions. Apply thin coats of paint to avoid smudges. Do not stain for more than one hour.
6. Wait 10 minutes before applying each next coat.
7. After use, clean the sprayer by inverting the can and blowing through the head until the paint stops coming out. If the atomizer is clogged, clean it with solvent, do not pierce it with a needle.

If after 1 hour you need to apply another coat, wait 7 days before coloring. This is necessary to ensure complete drying of the applied layers. The top layer begins to dry after 1 hour. Drying time 3 hours. Cylinder consumption 1–1.3 m or 4–6 calipers.