Split thread lock LAVR

Split thread lock LAVR

Prevents loosening of threaded connections
Reliably fixes threaded connections up to 20 mm, oil pan and valve cover, generator and throttle fasteners
Cures in thread gaps without air in 20 minutes
Gaining final strength after 6 hours at a temperature of at least + 18 °
Resistant to technical liquids, fuel, gas
Temperature range of operation of the repaired product from -60 to +150°
Unscrewing torque on loose screw pair - up to 17 Nm

The composition seals and fixes threaded connections that require periodic dismantling during service. Prevents self-unscrewing of parts under vibration and shock loads. It polymerizes quickly and is resistant to technical fluids. It is applied on any carving connections from ferrous metals.

Application
Clean threads of rust, oil and dirt
Degrease and thoroughly dry the threads
Cut off the tip of the dispenser, apply a small amount of the compound to the threads and spread over the entire surface
Make the final tightening of the connection
If dismantling is not possible, heat the connection to 200 ─ 250° with an industrial heat gun or blowtorch