FREE SHIPPING
5-in-1 Easy DIY Dent Removal Kit - Dent Repair Tool Kit, Effective on All Flat Surfaces, Ideal for Home Car Repairs
)Quantity
1
- No damages will be caused to surfaces during the process.
- Applicable on all surfaces (cars, refrigerators, machines)
- 5-in-one kit to remove slightest to deepest dents
- Made with rubber & durable plastic material
- 7 quick steps, even kids can follow
- Removes dent within minutes
Say goodbye to unsightly dents with our Easy DIY Dent Removal Repair Tool Kit, designed to offer a straightforward solution for removing dents from your vehicle. This comprehensive 5-in-1 kit is crafted from high-quality rubber and durable plastic, providing the resilience and flexibility needed to smooth out dents effectively.
The Kit has a unique bridge design, created to eliminate the risk of additional damage. The adhesive system design guarantees dent removal without the messy, sticky residue other systems are known to leave behind. No chemicals or other toxic materials are involved, so the original paint is 100% protected during the process. This is a paintless ding & dent repair.
- Material Quality: Constructed with a combination of sturdy rubber and durable plastic to ensure longevity and effective dent removal.
- 5-in-1 Kit: Comes equipped with all the necessary tools to tackle a wide range of dent sizes and shapes.
- Easy to Use: Designed for ease of use, allowing even beginners to repair dents without the need for professional assistance.
- Versatility: Ideal for use on most flat surfaces of your vehicle, excluding corners and creases.
How to use it? Slowly twist the nut in the middle of the bridge dent puller, to thoroughly and effectively repair the dents. Use enough glue to create a glue cushion of about 1-2 millimeters between the metal and the puller pad. It's fairly important to press the tool quickly to the operation surface.
- Clean damaged surface with a damp clean cloth
- Put the glue in the gun and heat (heat for about 5-10 min.)
- Pull the trigger and apply the glue to the drawing gasket (not the car)
- Immediately place the pad in the center of the dent and hold until it sticks
- Place the stem of the pad through the hole in the pulling bridge and screw the knob
- Tighten the knob until the dent pops up
- Clean surface.
Do not let the glue harden completely. It will just break off when you pull the dent. As you pull the dent you should see the glue stretch slightly, and there will be a distinctive metal popping sound if done properly.
Tip: This tool is not suitable for corners or creases.
