Quantity

About this item

Hassle-free transfer of non-corrosive liquids
Reduces spillages & overflows with the on/off button on the hand
Can pump water out of a clogged sink
Lightweight & portable
Battery operated: Two 2D batteries (not included)
Speed: 6 quarts/min
Rod length: 65cm approx., Tube length: 58cm approx.

Payment Methods:

Item description from the seller

Have you been transferring non-corrosive liquids for a while?

Would you like to get rid of it because you cannot go through the hassle anymore?

Bring your place this Battery-Operated Liquid Transfer Pump to get the job done most ingeniously.

The pump is perfect if your car runs out of gas in the middle of the road, if you need to refuel the generator, or if you need to transfer water from a tank to buckets without exerting extra effort or getting your hands and clothes dirty.

What you’ll get:

Risk-free non-corrosive liquid transfer: This portable siphon pump is ideal for transporting non-corrosive liquids such as water (not suitable for human consumption), oil, gasoline, and more.
Reduced spillage: Manual transfers always result in some spillage and waste, but there are ways to minimize this problem. This product guarantees that it will never happen again. Quickly flip the pump's ON/OFF switch if the liquid is about to overflow.
Strong & durable: Made to last, this pump is not like the cheap imitations that have flimsy plastic and glued-together parts.
Multiple uses: You can use it to clear out a clogged drain, empty out an aquarium, or refill the gas tank of your lawnmower.
Lightweight & portable: This assembly's lightweight design (225g) and slim profile allow it to be easily transported in a variety of vehicles or stowed away in a bag. As a result, in an emergency, this fuel siphon will be useful.

How to use this product?

To access the battery compartment, first remove the cover by twisting it off, then install the batteries and replace the cover.
Insert the vacuum tube into the container of supply.
Insert the receiving end into the port and press the button to initiate the transfer. If you press the button again, the transfer will immediately stop.
Return liquid to the container by keeping the pump upright and lifting the handle above the supply container. Before the tube and pump are completely dry, do not place the pump on the ground.
Rinse the interior of the pump with water after each use to extend its lifespan.

Item description from the seller

Have you been transferring non-corrosive liquids for a while?

Would you like to get rid of it because you cannot go through the hassle anymore?

Bring your place this Battery-Operated Liquid Transfer Pump to get the job done most ingeniously.

What you’ll get:

Risk-free non-corrosive liquid transfer: This portable siphon pump is ideal for transporting non-corrosive liquids such as water (not suitable for human consumption), oil, gasoline, and more.
Reduced spillage: Manual transfers always result in some spillage and waste, but there are ways to minimize this problem. This product guarantees that it will never happen again. Quickly flip the pump's ON/OFF switch if the liquid is about to overflow.
Strong & durable: Made to last, this pump is not like the cheap imitations that have flimsy plastic and glued-together parts.
Multiple uses: You can use it to clear out a clogged drain, empty out an aquarium, or refill the gas tank of your lawnmower.
Lightweight & portable: This assembly's lightweight design (225g) and slim profile allow it to be easily transported in a variety of vehicles or stowed away in a bag. As a result, in an emergency, this fuel siphon will be useful.

How to use this product?

To access the battery compartment, first remove the cover by twisting it off, then install the batteries and replace the cover.
Insert the vacuum tube into the container of supply.
Insert the receiving end into the port and press the button to initiate the transfer. If you press the button again, the transfer will immediately stop.
Return liquid to the container by keeping the pump upright and lifting the handle above the supply container. Before the tube and pump are completely dry, do not place the pump on the ground.
Rinse the interior of the pump with water after each use to extend its lifespan.

Listed on 11 October, 2022

FREE SHIPPING

Delivery & Return Policy

Shipping and Return Policy

Returns:Accepted

Exceptions may apply

Quantity

FREE SHIPPING

Delivery & Return Policy

Shipping and Return Policy

Returns:Accepted

Exceptions may apply

About this item

Hassle-free transfer of non-corrosive liquids
Reduces spillages & overflows with the on/off button on the hand
Can pump water out of a clogged sink
Lightweight & portable
Battery operated: Two 2D batteries (not included)
Speed: 6 quarts/min
Rod length: 65cm approx., Tube length: 58cm approx.

Payment Methods:

Item description from the seller

Have you been transferring non-corrosive liquids for a while?

Would you like to get rid of it because you cannot go through the hassle anymore?

Bring your place this Battery-Operated Liquid Transfer Pump to get the job done most ingeniously.

What you’ll get:

Risk-free non-corrosive liquid transfer: This portable siphon pump is ideal for transporting non-corrosive liquids such as water (not suitable for human consumption), oil, gasoline, and more.
Reduced spillage: Manual transfers always result in some spillage and waste, but there are ways to minimize this problem. This product guarantees that it will never happen again. Quickly flip the pump's ON/OFF switch if the liquid is about to overflow.
Strong & durable: Made to last, this pump is not like the cheap imitations that have flimsy plastic and glued-together parts.
Multiple uses: You can use it to clear out a clogged drain, empty out an aquarium, or refill the gas tank of your lawnmower.
Lightweight & portable: This assembly's lightweight design (225g) and slim profile allow it to be easily transported in a variety of vehicles or stowed away in a bag. As a result, in an emergency, this fuel siphon will be useful.

How to use this product?

To access the battery compartment, first remove the cover by twisting it off, then install the batteries and replace the cover.
Insert the vacuum tube into the container of supply.
Insert the receiving end into the port and press the button to initiate the transfer. If you press the button again, the transfer will immediately stop.
Return liquid to the container by keeping the pump upright and lifting the handle above the supply container. Before the tube and pump are completely dry, do not place the pump on the ground.
Rinse the interior of the pump with water after each use to extend its lifespan.

Item description from the seller

Have you been transferring non-corrosive liquids for a while?

Would you like to get rid of it because you cannot go through the hassle anymore?

Bring your place this Battery-Operated Liquid Transfer Pump to get the job done most ingeniously.

What you’ll get:

Risk-free non-corrosive liquid transfer: This portable siphon pump is ideal for transporting non-corrosive liquids such as water (not suitable for human consumption), oil, gasoline, and more.
Reduced spillage: Manual transfers always result in some spillage and waste, but there are ways to minimize this problem. This product guarantees that it will never happen again. Quickly flip the pump's ON/OFF switch if the liquid is about to overflow.
Strong & durable: Made to last, this pump is not like the cheap imitations that have flimsy plastic and glued-together parts.
Multiple uses: You can use it to clear out a clogged drain, empty out an aquarium, or refill the gas tank of your lawnmower.
Lightweight & portable: This assembly's lightweight design (225g) and slim profile allow it to be easily transported in a variety of vehicles or stowed away in a bag. As a result, in an emergency, this fuel siphon will be useful.

How to use this product?

To access the battery compartment, first remove the cover by twisting it off, then install the batteries and replace the cover.
Insert the vacuum tube into the container of supply.
Insert the receiving end into the port and press the button to initiate the transfer. If you press the button again, the transfer will immediately stop.
Return liquid to the container by keeping the pump upright and lifting the handle above the supply container. Before the tube and pump are completely dry, do not place the pump on the ground.
Rinse the interior of the pump with water after each use to extend its lifespan.