CANNY 5.3 PICO Automotive Visual Programmable Logic Controller
Quantity
-
Visual programming language
-
Firmware update direct over USB interface
-
3 User programmable bipolar Input-Output pins count
- Smart IO short-circuit/overload protection
-
12-bit 5V ADC Input with internal overvoltage protection
-
High Speed CAN 2.0A/B Interface
-
Dallas 1-Wire Master Interface
- 2 UART Interfaces count with RS-232 compatible mode
-
2 LIN 1.3/2.0 Interfaces count
- 3 High-Resolution PWM Generators outputs count
-
3 High-Resolution Asynchronous Counters count
-
100 mA Continuous output current sunk/sourced by any I/O pin
-
Internal clumping diodes protection jb all IOs
-
18VDC Rated voltage on I/O pin with respect to GND pin
-
9..18VDC Rated power supply voltage, DC
-
22 mA Overage current consumption, Normal mode
-
1 mA Overage current consumption in Sleep mode
-
-40C...+85C Operating Ambient Temperature Range
-
Ingress Protection Rating IP 50
-
59 x 19 x 8 Overall dimensions, mm
CANNY•5.3 pico is small-sized, cost-effective automotive programmable logic controller with CAN 2.0A/B interface, three general purpose IO channels, up to two LIN interfaces and protected ADC.
The on-board physical layer CAN an LIN interfaces allows to receive and transmit any valid messages.
Three universal, high voltage general purpose input/output channels can directly drive relays or other loads with sink or source current up to 100mA and/or listening input switches/pulses.
This controller is small enough to hidden installation into automotive wirings or ECUs. This is an ideal platform for building custom custom CAN or LIN-connected immobilizers or CAN<->LIN<->UART bridges.
Another popular application of CANNY•5.3 pico is the fast and cost-effective connecting of CAN-less sensor, switches, relays and other inputs and loads to CAN-network.
Using CannyLab® Integrated Development Environment controller can be programmed in simple but powerful graphical way. The internal USB interface is used for the firmware updates.