Fsl Paisley Machine Embroidery Design

Fsl Paisley Machine Embroidery Design instant download Paisley Pattern Embroidery FSL Free standing lace embroidery Paisley digital file instant download #272

This design comes with 5 size (height):

3.98” x 2.29” 9914 st

4.24” x 2.44” 10824 st

4.50” x 2.58” 11777 st

4.76” x 2.72” 12666 st

4.99” x 2.87” 13664 st

The following 9 formats are included in the file you will receive:

* DST - (Tajima)

* EXP - (Melco)

* HUS - (Husqvarna,Viking)

* JEF - (Janome,Elna,Kenmore)

* PES - (Brother,Deco,Babylock)

* SEW - (Janome,Elna,Kenmore)

*VP3 - (Husqvarna,Viking)

*VIP

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

********************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only - not a finished item.

****************

Used with water soluble stabilizer. Freestanding lace! Adorable design is stitched onto a wash away stabilizer When sewing out FSL use the same color bobbin thread as the top thread. For free standing lace hoop one or two layers of fiber water soluble stabilizers making sure it’s taut in the hoop and embroider the design onto the stabilizer. No fabric - just stabilizer! Keep it in the water bath for about 10 minutes then remove it from the warm water and place the design onto a dry flat surface until the thread has thoroughly dried.