Deliver to 
Free Shipping
  • Served Customers
  • Secure Payments
  • Served Customers
24/7 Live Chat
1 of 5
Waterproof Solder Seal Wire Connectors Kit1
2 of 5
Waterproof Solder Seal Wire Connectors Kit2
3 of 5
Waterproof Solder Seal Wire Connectors Kit3
4 of 5
Waterproof Solder Seal Wire Connectors Kit4
5 of 5
Waterproof Solder Seal Wire Connectors Kit5
Waterproof Solder Seal Wire Connectors Kit1
Waterproof Solder Seal Wire Connectors Kit2
Waterproof Solder Seal Wire Connectors Kit3
Waterproof Solder Seal Wire Connectors Kit4
Waterproof Solder Seal Wire Connectors Kit5
NaN

Waterproof Solder Seal Wire Connectors Kit

byGreatGadgets
27,795 sales
$19.97 
(was $40.00)
 & FREE Shipping
You Save:$20.03
50% off

Quantity

1
Payment Methods:
About this item

Free yourself from the hassle of crimping wires! They are time-consuming and expensive. Bring home this Waterproof Solder Wire Connectors Kit and make secure, water-resistant wire connections in an instant. Simply strip both ends of the wire and heat the connector with a heat or torch gun. It works with wire gauges sizes from 10 to 26.

What you’ll get:

  • Easy-to-apply permanent joints: You have to be a pro in order to make strong crimp joints but with this kit, even a novice can make high-quality wire connections. Just strip off 1/3 inch of the wire from both ends, insert the connector in the wire and heat it until the joint is formed.
  • Waterproof connections: There are two blue heat-activated adhesives that melt to form an IP67 water-resistant joint which prevents wire corrosion.
  • Handles all wire sizes: This solder butt connectors kit includes heat shrink tubes for wire gauge sizes 10 to 26.
  • Polyolefin exterior: The exterior of the connectors is made of polyolefin which has superb transparency and heat resistance properties.
  • Useful for home and automobiles.
  • Available in different combinations.

How to apply:

  • Strip 1/3 inches of wire from both ends.
  • Insert the connector in one of the wire ends.
  • Push together the conducting strands of both ends into each other so that they properly intertwine.
  • Now, bring the solder ring of the waterproof solder wire connector (silver part) on top of the strands and heat it using a heat gun.
  • The blue heat-activated adhesives will shrink first than the solder ring.
  • Continue to rotate the wire so that the heat is evenly distributed.
  • Allow the connection to cool down.