Polish for body and headlights VMPAUTO 100ml

Polish for body and headlights VMPAUTO 100ml

Single pass polish. Removes cobwebs, small scratches, holograms, persistent dirt, traces of acid rain and chemical reagents from the body. Removes scuffs, scratches, yellowed plastic layer from headlights, restores the transparency of plastic headlights. Free of silicones and waxes.

Advantages: one composition for the car body and headlights; can be used both manually and for a polishing machine; returns the surface of the body to its original luster; easy to apply; easily rubbed; during polishing is held under the polishing wheel; easy to remove; silicone and wax free; polishing effect does not go away after washing the car.

Ingredients: water, abrasive materials, fillers, surfactants, organic solvents, functional additives, preservative.

Materials: a clean cloth, a container of water, sanding paper or sanding wheels P800-P1500 for headlights and P1500-P3000 for body paintwork, masking tape.

It is recommended to apply the polish at a temperature of 10-25°. Do not apply on hot surfaces or in direct sunlight.

The procedure for the procedure for the body
:

Wash the body of the car;
If necessary, seal the areas of the paintwork around the surface to be treated with masking tape;
To remove large scratches that do not reach the enamel, pre-treatment with abrasive materials with a grit P1500-P3000 is necessary. To remove deeper scratches and chips, it is necessary to use other means: wax pencils, a touch-up set or painting parts;
Clean the surface with a damp cloth, dry;
Apply 1-2 g of polish to a clean and dry area to be treated;
Polish the composition with a medium-hard polishing wheel using a grinder at a speed of 1000-2000 rpm, repeat the procedure if necessary;
Rinse the area to be treated with water.