Speaker Injection Device, Medical Reusable:

- for intramuscular injection with disposable syringes of 5 ml and 3 ml.           

- for self-injections (for injections), both to yourself and to other people

The syringe gun injection device is designed to create a mechanical force when piercing and inserting a disposable syringe needle during intramuscular injections. Further, the introduction of medicines is carried out manually.

On the body of the syringe gun injection device, there is a bed for disposable syringes with a volume of 5 ml., it is equipped with an adapter for placing disposable syringes of 3 ml (according to customer reviews, it is also suitable for syringes with a volume of 2 ml).

 The depth of injection of needles of various lengths is regulated and controlled by the presence of inserts for a 5 ml and 3 ml syringe, which are included in the set of a reusable injection device.

How to use A reusable device for injecting a speaker:

· Check out the Drawing "General view of the Product"

· Hold the trigger (3) and hold it down, pull the sliders (6) back until it stops. While holding the sliders (6) in this position, remove your finger from the trigger (3). After these manipulations, the spring mechanism of the Syringe gun injection device is cocked and ready for use.

· Depending on the 3 ml or 5 ml disposable syringe used, insert the corresponding insert into the incision of the case, with the side protrusions forward: 3 ml for a 3 ml syringe or 5 ml for a 5 ml syringe. Push the insert forward until it stops, until a characteristic click.

· Treat the surfaces of the injection device in contact with the syringe with an alcohol wipe.

· Fill the medicine into the syringe and close the needle with a cap. On a 3 ml syringe, first put the adapter (4), which is part of the Product (complete set), in the center of the syringe cylinder.

· Place the disposable syringe in the Injection Device bed (2) so that the finger rest of the syringe is installed between the tabs of the shutter (9).