Julie is a wireless bra. Its pattern involves the use of dense, stable natural fabrics (linen, cotton). If you want to sew a bra from an elastic fabric, please let me know. This will require additional measurements (stretch recovery coefficient).

This model is two-layer. Outside is thick linen, inside it is lined with fine cotton. It’s very comfortable.

The bones are inserted along the side seams and in the center of the front.

Wide straps made of fabric are also very comfortable and do not dig into the skin. Rear straps sewn to the elastic band for regulation.

This bra is suitable for all sizes, including plus size.

This is a wireless bra made from natural fabric, so it is suitable for girls. However, there are no ready-made patterns in kid’s sizes in the shop. I will make for you a custom pattern according to individual measurements. The set will also include a pattern for a regular (not wide) back. Also, if in this case you do not need wide straps, write to me about this, indicating the width of your strap elastic.

All my bras sewn on conventional sewing machine with the function of a zig-zag.

I do not use a conventional measurement system. The main measure that I use is the horizontal arc (HD), in centimeters (see the picture). Simply put, you need to take this measurement between the ends of the underwire through the protruding point of the chest, horizontally. The dimensions of my sewing patterns are according to this measurement (if your measurement of HD is 23 cm, then you need size 23). This enables an individual approach to the creation of patterns. In the usual way, the pattern is created according to the difference between two dimensions (bust and under bust girth), but within this framework a wide variety of shapes and sizes is possible.

Please note: this is not ready-made pattern. This listing is for personalized bra pattern according to your individual measurements. This means that your custom sewing pattern is only ready after I receive your custom measurements. You will get a pattern exactly your size.

After completing the purchase, you can download the files: sewing instructions, instructions on how to take measurements, instructions on how to calculate stretch recovery coefficient for elastic fabric. These measurements are different from the usual ones. For universal patterns, 2 measurements are taken – bust and under bust. Since I am making a personalized tailor made pattern, I need more measurements and they may not be familiar to you. Most likely, you have never taken such measurements. This is the difference in the design methodology.

Some measurements may be new and unfamiliar to you. But they are necessary to draw an exact individual pattern. Remember that the success of our venture depends entirely on accurate measurements.

Also, measurement notation is not familiar to you. I named them as they are entered in my program. Please pay attention!

You need to take the necessary measurements as indicated. Write down this information in the same form (number, measurement designation) and send it to me by e-mail. Processing of your order will begin only after I receive your letter. I will send you a pattern in PDF format within 2 working days from the date of receipt of your letter.

There are ready-made bra patterns for this bra in my shop.

Materials and supplies:

*Paper pattern;

*Sewing machine;

*Scissors;

*Sewing threads;

*Natural fabric (linen, cotton; 0.5 m of each type ̶ for the top and for the lining);

*Elastic for the band (according to your girth under the bust). I used an elastic band with a silicone layer for a better fit to the body;

*Strap elastic about 30 cm / 12 inches (the strap width should match the size of your rings and sliders for secure straps that stay in place);

*Elastic to make the upper cup trim (about 3.5 m/138 inches);

*Rings and sliders;

*Hook and eye;

*Underwire channeling (about 0.5 m / 20 inches);

*2 plastiс bones. It is best to use special corset bones.

It is very convenient to use a special tailor’s ham https://www.inspireuplift.com/Bra-Ham-Sewing-Pattern-Half-Ball-Ham-Pattern-Tailor/iu/14851 . This round tailor’s ham is an indispensable item when sewing a bra. It makes it possible to give the correct shape to round seams when ironing.

This pattern is at an easy/intermediate level. Previous sewing experience is recommended. You need to know how to sew hook and eye closure, how to sew underwire channeling and elastic, etc.

This pattern is a work of authorship. Designed exclusively for your personal use. It is forbidden to transmit, forward to other people, publish, any other distribution. Please don’t sell or redistribute ANY copies of this pattern VIA EMAIL OR PRINTED or in any other form.

Feel free to message me with any questions! Let me know if something is not clear to you, I will try to help you. Please contact me if you have any problems with your order.